Thermal resistance research of power devices based on structural function curve correction method
This study investigated the thermal resistance of various layers within power devices. To this end, thermal resistance tests were conducted on an IGBT module, leading to the plotting of its structural function curve. This module was then structurally modeled, and subsequent transient thermal simulat...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | Chinese |
| Published: |
Editorial Department of Electric Drive for Locomotives
2025-03-01
|
| Series: | 机车电传动 |
| Subjects: | |
| Online Access: | http://edl.csrzic.com/thesisDetails#10.13890/j.issn.1000-128X.2025.02.103 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This study investigated the thermal resistance of various layers within power devices. To this end, thermal resistance tests were conducted on an IGBT module, leading to the plotting of its structural function curve. This module was then structurally modeled, and subsequent transient thermal simulations produced another structural function curve that was converted from the temperature rise curve. A fitting process was introduced to correct the measurement curve. The structural function distribution of thermal resistance in the interface materials at various layers was obtained from the corrected structural model. The corrected thermal resistance values were 0.510, 4.085, 4.085, 20.430 ,7.149, 5.106, and 26.550 K/kW for the chip layer, chip solder layer, DBC copper layer (upper), alumina ceramic layer, DBC copper layer (lower), substrate solder layer, and substrate, respectively. Furthermore, power cycling and passive thermal cycling tests were performed to verify the degenerate interval of thermal resistance before and after these tests, indicating substantial agreement between the test data and theoretical results. |
|---|---|
| ISSN: | 1000-128X |