Intermetallic Phases Examination in Cast AlSi5Cu1Mg and AlCu4Ni2Mg2 Aluminium Alloys in As-Cast and T6 Condition

QR-koodi

Intermetallic Phases Examination in Cast AlSi5Cu1Mg and AlCu4Ni2Mg2 Aluminium Alloys in As-Cast and T6 Condition

None

Tallennettuna:

Bibliografiset tiedot
Päätekijä:	Mrówka-Nowotnik, Grazyna
Aineistotyyppi:	Elektroninen Kirjan osa
Kieli:	englanti
Julkaistu:	IntechOpen 2011
Aiheet:	Physical Sciences, Engineering and Technology
Linkit:	https://www.intechopen.com/chapters/24032
Tagit:	Lisää tagi Ei tageja, Lisää ensimmäinen tagi!

Samankaltaisia teoksia

The Effect of Process Parameters on Residual Stress in a Friction Stir Processed Cast Aluminium Alloy AlSi9Mg
Tekijä: Marek Stanislaw WĘGLOWSKI, et al.
Julkaistu: (2016-06-01)

An Evaluation of Severe Plastic Deformation on the Densification Behaviour of Powder Metallurgy Aluminium Alloy Al-Mg-Si-Cu-Fe and Al-Zn-Mg-Cu
Tekijä: Bidulský, Róbert, et al.
Julkaistu: (2011)

Crack Growth in AlCu4Mg1 Alloy under Combined Cyclic Bending and Torsion
Tekijä: Rozumek, Dariusz, et al.
Julkaistu: (2011)

Material Model of the AlCu2SiMn Alloy Under Hot Plastic Forming
Tekijä: A. Gontarz, et al.
Julkaistu: (2015-06-01)

The Structure Analysis of Secondary (Recycled) AlSi9Cu3 Cast Alloy with and without Heat Treatment
Tekijä: Lenka HURTALOVÁ, et al.
Julkaistu: (2013-12-01)

Hydrides of Cu and Mg Intermetallic Systems: Characterization and Catalytic Function
Tekijä: Braga, M. Helena, et al.
Julkaistu: (2012)

ACTIVITY AND PRESSURE OF MAGNESIUM STEAM IN ALLOYS Ni-Mg-Si-Fe and Cu-Mg-Si-Fe
Tekijä: V. N. Vlasov, et al.
Julkaistu: (2010-09-01)

Effects of different Si content and Sr addition on microstructure characteristics and mechanical properties of cast Al-Si-Cu-Mg-Mn alloys
Tekijä: Xinxin Ma, et al.
Julkaistu: (2025-07-01)

Influencia del contenido de Mg,Cu y Ni en la estructura y propiedades mecánicas de las aleaciones Al-7Si fundidas. // Mg,Cu and Nickel content influence in the structure and mechanical properties of Al-7Si casting alloys.
Tekijä: V. Lavaert, et al.
Julkaistu: (2003-05-01)

Hot Tearing Evaluation of Al-0.9Mg-0.7Si Aluminium-cast Alloy
Tekijä: Z. Zulfadhli, et al.
Julkaistu: (2025-06-01)

High-Temperature Mechanical and Wear Behavior of Hypoeutectic Al–Si–(Cu)–Mg Alloys with Hardening Mechanisms Dictated by Varying Cu:Mg Ratios
Tekijä: Jaehui Bang, et al.
Julkaistu: (2025-07-01)

Solid-liquid composite diffusion in Al/Mg bimetallic joints with the Ni/Cu interlayer
Tekijä: Wenbo Wang, et al.
Julkaistu: (2025-07-01)

Tribo-technological features of laser powder bed fusion process: scratch and wear resistance of AlSi10Mg aluminium alloy
Tekijä: Danilo Guarino, et al.
Julkaistu: (2024-10-01)

Improvement in mechanical and corrosion properties of cast Mg17Al12-based intermetallic alloy by modifying the microstructure with La
Tekijä: Yanrui Li, et al.
Julkaistu: (2025-07-01)

PRODUCTION OF QUALITATIVE SLUGS OF Cu-Mg AND Cu-Mg-Sn-ALLOYS
Tekijä: E. B. Ten, et al.
Julkaistu: (2009-08-01)

A new Al80Mg10Si5Cu5 multicomponent aluminium alloy: Microstructure, mechanical, and physical properties
Tekijä: Ester Villanueva, et al.
Julkaistu: (2025-07-01)

Effect of Severe Plastic Deformation on the Properties and Structural Developments of high purity Al and Al-Cu-Mg-Zr Aluminium Alloy
Tekijä: Kvačkaj, Tibor, et al.
Julkaistu: (2011)

Сorrosion resistance of the welded junction of aluminum alloy of the Al-Mg-Si-Cu system
Tekijä: Lyudmila Nyrkova, et al.
Julkaistu: (2020-12-01)

Evaluating the influence of friction stir processing on AlSi7Mg0.2 alloy using principal component analysis
Tekijä: Eddie Gazo-Hanna, et al.
Julkaistu: (2025-09-01)

Heat transfer performance of CuCrZr/AlSi7Mg multi-material heat sinks with triply periodic minimal surface manufactured by laser powder bed fusion
Tekijä: Chang Liu, et al.
Julkaistu: (2025-12-01)

Effect of inert gas blowing on the microstructure and mechanical properties of semi-solid cast Al–20 %Mg2Si composite
Tekijä: Moein G. Shabestari, et al.
Julkaistu: (2025-07-01)

Synthesis of Copper Based Composites Reinforced with (Ni,Cu)3Al Intermetallic via Low Energy Ball Milling
Tekijä: J. A. Verduzco, et al.
Julkaistu: (2025-07-01)

DIAGRAM OF STATE AND PHYSICAL-CHEMICAL CHARACTERISTICS OF ALLOYS OF SYSTEM Ni-Cu-Mg
Tekijä: Ju. A. Ageev, et al.
Julkaistu: (2009-08-01)

Study the Mechanical Properties of (Al-Cu-Mg) Matrix Composites Reinforced by Alumina Particles
Tekijä: Abdullah M. Ali
Julkaistu: (2023-02-01)

Effect of long-term aging and Cu addition on clustering, strength and strain hardening in Al-Mg-Zn-(Cu) crossover alloys
Tekijä: Philip Aster, et al.
Julkaistu: (2025-09-01)

The Effect of Mg Content on the Microstructure and Open Porosity of a Porous FeAl Intermetallic Compound
Tekijä: Weilun Xue, et al.
Julkaistu: (2025-05-01)

AlSi10Mg plate-lattice structures fabricated by laser powder bed fusion exhibiting high specific energy absorption
Tekijä: Joseph Berthel, et al.
Julkaistu: (2025-09-01)

Impact of Multiple-Laser Processing on the Low-Cycle Fatigue Behaviour of Laser-Powder Bed Fused AlSi10Mg Alloy
Tekijä: Arun Prasanth Nagalingam, et al.
Julkaistu: (2025-07-01)

Effect of dual stage solid solution on the microstructure and mechanical properties of Al-Zn-Mg-Cu
Tekijä: Zhuo WANG, et al.
Julkaistu: (2025-08-01)

FRACTURE BEHAVIOR OF FeAlSi INTERMETALLICS
Tekijä: Jaroslav Čech, et al.
Julkaistu: (2020-06-01)

Investigating the Characteristics of the Laser Powder Bed Fusion of SiCp/AlSi10Mg Composites: From a Single Track to a Cubic Block
Tekijä: Ying He, et al.
Julkaistu: (2025-06-01)

Comparative Evaluation of HFC‐134a Decompositions Over Metal‐Impregnated γ‐Al2O3 Catalysts (M/γ‐Al2O3) (M = Mg, Ni, Co, Zn, Cu)
Tekijä: Myeong‐Heon Yoo, et al.
Julkaistu: (2025-07-01)

Squeeze Casting of Al-Si Alloys
Tekijä: Denise, Bellisario, et al.
Julkaistu: (2012)

Laser powder bed fusion of AlN and ZrN reinforced AlSi10Mg matrix composites: Effect of wettability and volume fraction on microstructure and mechanical properties
Tekijä: V.S. Suvorova, et al.
Julkaistu: (2025-07-01)

Effect of the microstructure on the corrosion behavior of a AlCuNiMn and AlCuNiMnSi high entropy alloys in a 3.5 wt% NaCl solution
Tekijä: Celine Chiong, et al.
Julkaistu: (2025-07-01)

On the Optimization of T6 Heat Treatment Parameters of a Secondary Al-Si-Cu-Mg Foundry Aluminum Alloy: A Microstructural and Mechanical Characterization
Tekijä: Mattia Merlin, et al.
Julkaistu: (2025-06-01)

Analysis of the Topographical, Microstructural and Mechanical Surface Properties of Powder Bed Fusion Melted AlSi10Mg for a Broad Range of Process Parameters
Tekijä: Urban Klanjšček, et al.
Julkaistu: (2025-06-01)

Precipitates of Gamma-Mg17Al12 Phase in Mg-Al Alloys
Tekijä: Braszczyńska-malik, Katarzyna
Julkaistu: (2011)

Regulation of high-temperature microstructure evolution and recrystallization by pre-strain accumulation in Al–Zn–Mg–Cu alloys
Tekijä: Dejin Wei, et al.
Julkaistu: (2025-07-01)

Enhancement of the Thermal Stability of Engine Block Alloy Al-10Si-1Cu-0.5Mg-0.5Ni-0.5Fe with Trace Additions of Ti and Zr
Tekijä: Mohammad Salim KAISER
Julkaistu: (2025-02-01)