INFLUENCE OF SOFT: SQUEEZING ON THE AXIAL CHEMICAL HETEROGENEITY DEGREE AT PRODUCTION OF CONTINUOUSLY-CASTED INGOTS. Message 2. Mathematical modeling and analysis of the results

QR Code

INFLUENCE OF SOFT: SQUEEZING ON THE AXIAL CHEMICAL HETEROGENEITY DEGREE AT PRODUCTION OF CONTINUOUSLY-CASTED INGOTS. Message 2. Mathematical modeling and analysis of the results

Mathematical model and results of calculation analysis on determination of influence of ‘'soft squeezing” on degree of axial chemical heterogeneity(distribution of carbon, sulfur and manganese) in billets, produced by means of continuous casting, are given.

Saved in:

Bibliographic Details
Main Authors:	Ju. A. Samojlovich, V. I. Timoshpolskij, I. A. Trusova, N. L. Mandel
Format:	Article
Language:	English
Published:	Belarusian National Technical University 2008-11-01
Series:	Литьë и металлургия
Online Access:	https://lim.bntu.by/jour/article/view/1294
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

AXIAL CHEMICAL HETEROGENEITY OF CONTINUOUSLY CASTED STEEL INGOTS
by: Ju. A. Samojlovich, et al.
Published: (2005-11-01)

INFLUENCE OF SOFT SQUEEZING ON THE DEGREE OF AXIAL CHEMICAL HETEROGENEITY AT PRODUCTION OF CONTINUOUSLY CASTED SLUGS. Message 1. Analysis of existing methods of production realization and calculation of regimes of soft squeezing
by: Ju. A. Samojlovich, et al.
Published: (2008-08-01)

RESEARCH OF THE TILTING PROCESSES OF THE CYLINDER INGOTS IN ANNULAR FURNACES. Message 2. Regularities of thermophysical and thermomechanical processes
by: V. I. Timoshpolskij, et al.
Published: (2005-11-01)

CONTROL OF THE PROCESS OF SCORCHING BY MEANS OF ITS MICROALLOYING AT CONTINUOUS CASTING. Message 2. Generalization of experimental results
by: Ju. A. Samojlovich, et al.
Published: (2010-05-01)

SYSTEMS OF SOFT SQUEEZING IN THE MACHINES OF CONTINUOUS CASTING AND THEIR INFLUENCE ON THE SLUGS MACROSTRUCTURE QUALITY
by: V. A. Matochkin, et al.
Published: (2010-05-01)

TEMPERATURE STRESSES IN HARDENING UNINTERRUPTEDLY-CASTED INGOT AT CONTROLLED COOLING
by: Ju. S. Postolnik, et al.
Published: (2008-08-01)

INCREASING OF EFFICIENCY OF THE CRYSTALLIZER WORKING AT CONTINUOUS CASTING OF INGOTS
by: E. I. Marukovich, et al.
Published: (2005-05-01)

RESEARCH OF THE MATHEMATICAL MODELS OF CONTINUOUS CAST INGOTS
by: R. I. Es’man, et al.
Published: (2016-01-01)

Influence of structural inversion in cooling austeunite on the character of thermal stresses in uninterruptedly cast ingot
by: Ju. A. Samojlovich, et al.
Published: (2002-11-01)

REDUCTION OF ZONE OF COLUMNAR GRAINS IN STEEL INGOT BY MEANS OF THE MELT MICROALLOYING
by: Ju. A. Samojlovich, et al.
Published: (2007-08-01)

MECHANICAL CHARACTERISTICS OF INDUSTRIAL TYPES OF STEEL AT HARDENING OF INGOTS AND SLUGS
by: V. I. Timoshpolskij, et al.
Published: (2005-08-01)

The mechanical characteristics of the alloyed steel grades, used for continuous slugs casting at high temperatures
by: Ju. A. Samojlovich, et al.
Published: (2002-11-01)

CRACK FORMATION PROCESSES IN BEARING ROLLERS OF THE MACHINES OF THE SLUGS CONTINUOUS CASTING
by: V. I. Timoshpolskij, et al.
Published: (2005-08-01)

ENVIRONMENTALLY SAFE CONTINUOUS CASTING OF HYPEREUTECTIC FINE-CRYSTALLINE SILUMIN INGOTS
by: V. Ju. Stetsenko, et al.
Published: (2010-09-01)

RESEARCH OF THERMO-GRAVITY CONVECTIVE PROCESSES IN LIQUID NUCLEUS AT HARDENING OF STEEL INGOTS
by: Ju. A. Samojlovich, et al.
Published: (2005-11-01)

CONTINUOUS CASTING OF EUTECTIC STRUCTURALSUPERFINE INGOTS OF SILUMINS WITHOUT APPLICATION OF IMPURITY MODIFIERS
by: V. Ju. Stetsenko, et al.
Published: (2010-09-01)

THE EQUATION FOR THE CONTINUOUS INGOT SOLIDIFICATION PROCESS FOR CONTROL SYSTEMS OF CONTINUOUS CASTING CASTER MNLZ
by: I. A. Pugachev, et al.
Published: (2013-09-01)

The calculations of heating of the continuously-casted slugs in the furnaces with pacing beams taking into account cooling of the lower part of slugs
by: Ju. A. Samojlovich, et al.
Published: (2003-08-01)

Squeeze Casting of Al-Si Alloys
by: Denise, Bellisario, et al.
Published: (2012)

INVESTIGATION OF THE PROCESSES OF THE CYHNDRICAL SLUGS TILTING IN ANNULAR FURNACES. Message 1. Physical and mathematical modeling
by: V. I. Timoshpolskij, et al.
Published: (2005-08-01)

Evaluation of heat flows in axial direction at continuous casting of round billet
by: E. I. Marukovich, et al.
Published: (2003-02-01)

Axially-Symmetric Squeezed Films as Viscoelastic Flows with Dominating Extensions
by: S. Zahorski
Published: (1986-06-01)

CONTINUOUS HORIZONTAL CASTING INTO JET CRYSTALLIZER OF INGOTS WITH DIAMETER 70 MM OF SILUMIN AK 12
by: V. Ju. Stetsenko, et al.
Published: (2009-08-01)

CONTINUOUS HORIZONTAL CASTING INTO JET CRYSTALLIZER OF INGOTS WITH DIAMETER 70 MM OF SILUMIN AK 18
by: V. Ju. Stetsenko, et al.
Published: (2009-08-01)

Efficiency of use of thermal insulation fillers for steel ingots quality improvement
by: I. A. Samojlovich, et al.
Published: (2001-05-01)

The idea of “soft” squeezing as a method of control of shrink and liquidation processes at hardening of uninterruptedly cast slugs
by: V. A. Matochkin, et al.
Published: (2003-02-01)

MATHEMATICAL MODELING OF THE CYLINDRICAL INGOTS HEATING PROCESS IN CHAMBER FURNACE
by: V. I. Timoshpolskij, et al.
Published: (2010-08-01)

Application of classical numerical methods in the calculation of solidification modes of a continuous ingot
by: V. I. Timoshpolsky, et al.
Published: (2020-10-01)

The two-phase state of melt at continuous casting of the high carbon steel
by: Ju. A. Samojiovich, et al.
Published: (2003-02-01)

Mathematical modeling of hydrodynamic processes in the liquid nucleus of an ingot
by: Yu. A. Samojlovich, et al.
Published: (2000-08-01)

Calculation of temperatures, stresses and deformations at production of uninterruptedly-casted slugs. Information 1. Solution of connected problems of non-stationary thermoviscoelasticity for hardening slugs during continuous casting
by: Ju. A. Samojlovich, et al.
Published: (2002-08-01)

INFLUENCE OF THE CHEMICAL COMPOSITION OF CHSHG ON THE STRUCTURE OF INGOTS AT CASTING BY DIRECTIONAL HARDENIN
by: E. I. Marukovich, et al.
Published: (2005-05-01)

ANALYSIS OF THE WAYS OF HEATING OF THE LARGE-CAPACITY INDUSTRIAL INGOTS WITH HEIGHTENED THERMOCONTENT
by: V. I. Timoshpolskij, et al.
Published: (2004-02-01)

INCREASE OF WORKING EFFICIENCY OF MACHINES OF INGOTS CONTINUOUS CASTING AS A RESULT OF INTRODUCTION OF CRYSTALLIZERS SLEEVES «VM-SINUS»
by: G. I. Nikolaev, et al.
Published: (2011-09-01)

INTERRELATION OF RHOMBICITY AND OCCURRENCE OF INTERNAL CRACKS AT CONTINUOUS CASTING OF SORTED SLUG
by: Ju. A. Samojlovich, et al.
Published: (2008-09-01)

INVESTIGATION OF THERMOSTRESSED STATE OF STEEL INGOT AT TRANSPORTATION FROM FURNACE TO ROLLING MILL
by: V. I. Timoshpolskij, et al.
Published: (2008-11-01)

EFFECT OF SOLID CRUST ADHESION TO THE CRYSTALLIZER WALL AT CONTINUOUS CASTING OF STEEL. Message 2: Influence of the crystallizer hunting regime
by: Ju. A. Samojiovich, et al.
Published: (2007-05-01)

Deformation of cast iron ingots at production of machine-construction parts
by: L. R. Dudetskaya, et al.
Published: (2001-08-01)

Experimental investigations of hardening and heating processes of large steel industrial ingots
by: I. A. Samojlovich, et al.
Published: (2001-11-01)

PROCESSES OF MASS-TRANSFER IN DENDRITE GRIT AT HARDENING OF STEEL INGOTS AND SLUGS
by: Ju. A. Samoilovich, et al.
Published: (2006-02-01)