STABILIZATION OF TENSION OF METAL CORD WINDING

QR-koodi

STABILIZATION OF TENSION OF METAL CORD WINDING

Advantages of the new technology of metal cord winding on master reel which enables to reduce negative influence of this operation on straightness of metal cord, to increase quality of the reinforced rubber-cord cloth and to lower costs of car tires production are presented.

Tallennettuna:

Bibliografiset tiedot
Päätekijät:	Yu. L. Hudoley, O. M. Matveev, V. P. Domnenko
Aineistotyyppi:	Artikkeli
Kieli:	englanti
Julkaistu:	Belarusian National Technical University 2014-11-01
Sarja:	Литьë и металлургия
Linkit:	https://lim.bntu.by/jour/article/view/44
Tagit:	Lisää tagi Ei tageja, Lisää ensimmäinen tagi!

Samankaltaisia teoksia

BELARUSIAN METAL CORD IS 25 YEARS OLD
Tekijä: O. V. Abramenko, et al.
Julkaistu: (2012-11-01)

MODERN TENDENCIES OF EQUIPMENT FOR SPIT OF METAL CORD
Tekijä: A. V. Vedeneev, et al.
Julkaistu: (2005-11-01)

Production of metal cord construction size 7 x 7 x 0,22 on root machines type RIR –15
Tekijä: O. M. Matveev, et al.
Julkaistu: (2020-10-01)

ADHESION OF RUBBER TO METAL CORD AND ITS PTESETVATION
Tekijä: N. V. Andrianov, et al.
Julkaistu: (2005-05-01)

Influence of the quality of compounds on the adhesion properties of metal cord.
Tekijä: O. N. Khrol
Julkaistu: (2020-06-01)

NEW APPROACHES IN FORMING OF METAL CORDS PARTIES ON RESIDUAL TORSION
Tekijä: E. L. Lipskij, et al.
Julkaistu: (2011-08-01)

PERSPECTIVES OF APPLICATION OF TECHNOLOGICAL PROCESSES IN PRODUCTION OF METAL CORD
Tekijä: A. I. Gordienko, et al.
Julkaistu: (2009-05-01)

METAL CORD WITH FULL PENETRATION OF RUBBER COMPOUND INTO STRUCTURE
Tekijä: A. V. Vedeneev
Julkaistu: (2006-08-01)

PROBLEMS OF WIRES MIGRATION OF INLAYS OF METAL CORD OF COMPACT STRUCTURES
Tekijä: A. V. Vedeneyev, et al.
Julkaistu: (2012-11-01)

METHODS OF DETERMINATION OF BINDING STRENGTH WITH RUBBER ON METAL-CORD AND EDGE WIRE
Tekijä: V. A. Rykusova, et al.
Julkaistu: (2006-05-01)

Stability of a compressed-tensioned rod of variable cross-section with combined loading
Tekijä: H. P. Kulterbaev, et al.
Julkaistu: (2024-01-01)

Development of technology for the production of metal cord with a modified brass coating
Tekijä: O. Yu. Khodosovskaya, et al.
Julkaistu: (2022-05-01)

NUMERICAL MODELING OF THE METAL CORD DISCHARGE PROCESS USING THE METHOD OF FINITE ELEMENTS
Tekijä: Yu. L. Bobarikin, et al.
Julkaistu: (2012-08-01)

ASSIMILATION OF PRODUCTION OF METAL CORD FOR BIG- AND SUPERBIG-VOLUME TIRES AT RUP “BMZ”
Tekijä: Ju. L. Hudolej, et al.
Julkaistu: (2008-05-01)

MASTERING OF METAL CORD PRODUCTION FOR BIG- AND SUPERBIG-SIZE TIRES AT RUP «BMZ»
Tekijä: Ju. L. Hudolej, et al.
Julkaistu: (2009-05-01)

INFLUENCE OF DIFFERENT FACTORS ON THE RATE OF RAISE OF THE RUBBER METAL CORD BLADE BORDER
Tekijä: V. A. Matochkin, et al.
Julkaistu: (2005-05-01)

Stability of an Imperfect Truss Loaded by Wind
Tekijä: Marcin KRAJEWSKI, et al.
Julkaistu: (2016-12-01)

Study and development of methods for predicting the physical and mechanical properties of thin wire and metal cord
Tekijä: E. S. Eltsova, et al.
Julkaistu: (2023-01-01)

Ethnic Tensions and National (In)Stability in Ethiopia: Analyzing Risks of Ethnic Cleansing
Tekijä: Amsalu K. Addis
Julkaistu: (2025-03-01)

DEPENDENCE FOR CALCULATION OF METAL CORD BREAKAGE IN THE PROCESS OF SPIN ON WIRE SAWS OF DOUBLE TORSION
Tekijä: Yu. L. Bobarikin, et al.
Julkaistu: (2014-07-01)

CONTINUOUS CASTING OF COPPER ANODES FOR PUTTING OF GALVANIC COAT AT PRODUCTION OF METAL CORD
Tekijä: E. I. Marukovich, et al.
Julkaistu: (2006-08-01)

DEPENDENCE OF BENDING INFLEXIBILITY AND STRETCHING MODULE OF METAL CORD ON ITS TECHNICAL CHARACTERISTICS
Tekijä: O. A. Rjabtsev, et al.
Julkaistu: (2005-11-01)

PROBLEMS OF MIGRATION OF WIRES OF THE METAL CORD INSIDE LAYERS OF COMPACT CONSTRUCTIONS
Tekijä: A. V. Vedeneev, et al.
Julkaistu: (2012-02-01)

Normal-Tension (Low-Tension) Glaucoma
Tekijä: Sheleg, Tsvi
Julkaistu: (2011)

ASSIMILATION OF THE TECHNOLOGY OF STEEL CAST FOR METAL CORD IN CONDITIONS OF RUP “BMZ”
Tekijä: N. V. Andrianov, et al.
Julkaistu: (2005-05-01)

The experience of modernization of mills of wet wire drawing for the metal wire cord
Tekijä: A. V. Demidov, et al.
Julkaistu: (2019-01-01)

STUDY OF INFLUENCE OF THE BRASS METAL CORD STORAGE TIME ON BONDING WITH RUBBER STRENGTH
Tekijä: O. A. Ljalina, et al.
Julkaistu: (2007-05-01)

NEW TYPE OF INVESTIGATION OF POLLUTION WITH OXIDE NON-METALLIC IMPURITIES OF ROLLED WIRE FOR PRODUCTION OF METAL CORD
Tekijä: N. V. Dubovets, et al.
Julkaistu: (2009-08-01)

DECREASE OF BREAKAGE OF HIGH-STRENGTH WIRE AT METAL CORD TWIST ON MACHINES OF DOUBLE TORSION
Tekijä: B. A. Biryukov, et al.
Julkaistu: (2012-11-01)

Research the causes of formation of internal pores (blowholes) in welded joints of metal wire cord
Tekijä: I. V. Borisovets, et al.
Julkaistu: (2019-01-01)

Experience in conducting tests on a torsiometer to determine the pitch of the metal cord
Tekijä: N. A. Akunets
Julkaistu: (2020-12-01)

Perfection of the regime of deoxidation and out-of-fumace processing of cord steel on the basis of information on oxidability of metal
Tekijä: V. V. Enders, et al.
Julkaistu: (2002-11-01)

Stability of Non-Uniform Soils Slope with Tension Cracks Under Unsaturated Flow Conditions
Tekijä: Jing Zhang, et al.
Julkaistu: (2025-06-01)

INFLUENCE OF TWIST TECHNOLOGY BY METHOD OF DOUBLE TORSION ON FORMATION OF RESIDUAL TORSIONS AND STRAIGHTNESS OF METAL CORD
Tekijä: V. P. Fetisov, et al.
Julkaistu: (2012-11-01)

Influencia de la tecnología de fabricación de las cuchillas de metal en el estado de las tensiones residuales // Influence of the metal cutters manufacturing technology in the state of the residual tensions
Tekijä: M. Rivas Santana, et al.
Julkaistu: (1998-01-01)

Umbilical cord and cord blood cells promising for biobanking
Tekijä: V. V. Chrishtop, et al.
Julkaistu: (2025-05-01)

BIODIAGNOSTICS OF STABILITY OF SOUTHERN RUSSIA CHERNOZEMS STABILITY TO POLLUTION BY HEAVY METALS
Tekijä: M. V. Yaroslavtsev, et al.
Julkaistu: (2014-11-01)

Analysis and Control of Voltage Stability in Offshore Wind Systems Under Small Disturbances
Tekijä: João P. L. Dantas, et al.
Julkaistu: (2025-06-01)

Stability of metal structures : a world view /
Julkaistu: (1991)

Problem issues in definition of the size of wire residual deformation after metal cord laying
Tekijä: V. V. Filippov, et al.
Julkaistu: (2001-11-01)