LPBF-Produced Elastomeric Lattice Structures for Personal Protection Equipment: Mechanical Performance Versus Comfort-Related Attributes

LPBF-Produced Elastomeric Lattice Structures for Personal Protection Equipment: Mechanical Performance Versus Comfort-Related Attributes

This study focuses on the energy absorption and wearer comfort attributes of regular lattice structures fabricated by laser powder bed fusion from two elastomeric materials, namely TPU1301 and TPE300, for use in personal protective equipment (PPE). This study compares Body-Centered Cubic (BCC), Face...

Full description

Saved in:
Bibliographic Details
Main Authors: William Turnier Trottier, Antoine Collin, Thierry Krick, Vladimir Brailovski
Format: Article
Language:English
Published: MDPI AG 2025-05-01
Series:Journal of Manufacturing and Materials Processing
Subjects:
additive manufacturing
laser powder bed fusion
lattice structures
TPU
thermoplastic elastomers
impact absorption
Online Access:https://www.mdpi.com/2504-4494/9/6/182
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:This study focuses on the energy absorption and wearer comfort attributes of regular lattice structures fabricated by laser powder bed fusion from two elastomeric materials, namely TPU1301 and TPE300, for use in personal protective equipment (PPE). This study compares Body-Centered Cubic (BCC), Face-Centered Cubic (FCC) and Kelvin (KE) lattice structures with density varying from 0.15 to 0.25 g/cm<sup>3</sup>, cell size varying from 10 to 14 mm and feature size varying from 1 to 3 mm. Quasi-static and dynamic compression testing confirmed that among the studied geometries, KE structures printed with TPE300 powders provide the best combination of reduced peak acceleration and increased compliance, thereby improving both safety and comfort. Using the protection–comfort maps built on the basis of this study enables the design of lightweight and compact protective structures. For example, if a safety layer protecting a 100 mm<sup>2</sup> surface area can be manufactured from either TPE300 or TPU1100 powders using either KE or FCC structures, the KE TPE300 layer will be 1.5 times thinner and 2.5 times lighter than its FCC TPU1301 equivalent. The results of this study thus provide a basis for the optimization of lattice structures in 3D-printed PPE to meet both service and manufacturing requirements.
ISSN:2504-4494

Similar Items