Forecasting Average Daily and Peak Electrical Load Based on Average Monthly Electricity Consumption Data
This article is devoted to the determination of the average daily electric load and the average electric load during the hours of maximum load, taking into account the generalized coefficient A<sub>i</sub>, using data on electricity consumption for apartment buildings and individual resi...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-05-01
|
| Series: | Electricity |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2673-4826/6/2/26 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This article is devoted to the determination of the average daily electric load and the average electric load during the hours of maximum load, taking into account the generalized coefficient A<sub>i</sub>, using data on electricity consumption for apartment buildings and individual residential buildings in Chelyabinsk and the cities of Dushanbe and Khorog in the Republic of Tajikistan. The results of modeling the average daily electric load, taking into account the developed generalized coefficient A<sub>i</sub>, showed that the specific power values for apartments in apartment buildings and in individual residential buildings in the city of Chelyabinsk and the cities of Dushanbe and Khorog of the Republic of Tajikistan were overestimated, taking into account the applicability in the Republic of Tajikistan of the same standard values of specific electric loads (SELs) for apartments in apartment buildings (ABs) as in the Russian Federation. According to the results of modeling using data on the average monthly electricity consumption for 226 apartments in ABs and for individual residential buildings in Chelyabinsk, and according to the proposed approach, the average daily electric load on days during the month varied in the range of 2–3.5 kW/sq and below, while that for the cities of Dushanbe and Khorog of the Republic of Tajikistan varied in the range of 2–5 kW/sq and below, which did not exceed the SEL given by RB 256.1325800.2016. However, because of the lack of other energy sources (gas supply and hot water supply) in the conditions of the Republic of Tajikistan, on the basis of the obtained maximum load time factor and the generalized coefficient <inline-formula><math xmlns="http://www.w3.org/1998/Math/MathML" display="inline"><semantics><mrow><msub><mrow><mi mathvariant="normal">A</mi></mrow><mrow><mi mathvariant="normal">i</mi><mo>(</mo><mi mathvariant="normal">E</mi><mo>)</mo></mrow></msub></mrow></semantics></math></inline-formula>, the obtained values of actual capacity exceeded the maximum during peak hours by 1.2–2.5 times the SEL given by RB 256.1325800.2016. To increase the durability and serviceability of power supplies and enhance the effectiveness of forecasting, the authors propose an approach based on the clustering of meteorological conditions, where each cluster has its own regression model. The decrease in mean absolute error due to clustering was 0.52 MW (57%). The use of meteorological conditions allowed the forecast error to be reduced by 0.22 MW (27%). High accuracy in electrical consumption forecasting leads to increased quality of power system management in general, including under such key indicators as reliability and serviceability. |
|---|---|
| ISSN: | 2673-4826 |