Utilization of Waste Banana Peels and Corn Cobs as Substrates in Neurospora sitophila Fermentation for Production of Natural Yellow Dyes

In the current situation, biomass gasification has become a major interest in producing clean energy and green chemicals. By gasification, the biomass can be converted to synthetic gas (syngas) for many purposes. However, syngas with high tar content can cause pipeline fouling and disturb the operat...

Full description

Saved in:
Bibliographic Details
Main Authors: Aida Nur Ramadhani, Listia Aulia Ruwaidah, Halimah Madania Rahman, Nadya Khoirun Nisa, Intan Septiya, Endang Kwartiningsih
Format: Article
Language:English
Published: Universitas Syiah Kuala, Chemical Engineering Department 2024-06-01
Series:Jurnal Rekayasa Kimia & Lingkungan
Subjects:
Online Access:https://jurnal.usk.ac.id/RKL/article/view/33570
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:In the current situation, biomass gasification has become a major interest in producing clean energy and green chemicals. By gasification, the biomass can be converted to synthetic gas (syngas) for many purposes. However, syngas with high tar content can cause pipeline fouling and disturb the operation of downstream equipment. To reduce tar content, a two-series wet scrubber was installed for syngas cleaning produced by palm kernel shell gasification. Firstly, the gasification is operated at a temperature range of 500 – 600oC and 700 – 800oC to determine the conditions where the lowest tar syngas is produced. After that, the wet scrubber is installed with a variety of solvents including isopropyl alcohol, water, used cooking oil, and used lubricating oil. The results show that the lowest tar syngas was produced at a temperature of 800oC with a tar yield of 0.165 g/kg biomass. Meanwhile, in the same condition, isopropyl alcohol delivers the most substantial impact on tar removal efficiency, whereas used lubricating oil results in less impact. The use of isopropyl alcohol resulted in 99.25% tar removal effectiveness while lubricating oil yielded just 50.32%.
ISSN:1412-5064
2356-1661