Review of Research on Supercritical Carbon Dioxide Axial Flow Compressors
Since the beginning of the 21st century, the supercritical carbon dioxide (sCO<sub>2</sub>) Brayton cycle has emerged as a hot topic of research in the energy field. Among its key components, the sCO<sub>2</sub> compressor has received significant attention. In particular, ax...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-06-01
|
| Series: | Energies |
| Subjects: | |
| Online Access: | https://www.mdpi.com/1996-1073/18/12/3081 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Since the beginning of the 21st century, the supercritical carbon dioxide (sCO<sub>2</sub>) Brayton cycle has emerged as a hot topic of research in the energy field. Among its key components, the sCO<sub>2</sub> compressor has received significant attention. In particular, axial-flow sCO<sub>2</sub> compressors are increasingly being investigated as power systems advance toward high power scaling. This paper reviews global research progress in this field. As for performance characteristics, currently, sCO<sub>2</sub> axial-flow compressors are mostly designed with large mass flow rates (>100 kg/s), near-critical inlet conditions, multistage configurations with relatively low stage pressure ratios (1.1–1.2), and high isentropic efficiencies (87–93%). As for internal flow characteristics, although similarity laws remain applicable to sCO<sub>2</sub> turbomachinery, the flow dynamics are strongly influenced by abrupt variations in thermophysical properties (e.g., viscosities, sound speeds, and isentropic exponents). High Reynolds numbers reduce frictional losses and enhance flow stability against separation but increase sensitivity to wall roughness. The locally reduced sound speed may induce shock waves and choke, while drastic variation in the isentropic exponent makes the multistage matching difficult and disperses normalized performance curves. Additionally, the quantitative impact of a near-critical phase change remains insufficiently understood. As for the experimental investigation, so far, it has been publicly shown that only the University of Notre Dame has conducted an axial-flow compressor experimental test, for the first stage of a 10 MW sCO<sub>2</sub> multistage axial-flow compressor. Although the measured efficiency is higher than that of all known sCO<sub>2</sub> centrifugal compressors, the inlet conditions evidently deviate from the critical point, limiting the applicability of the results to sCO<sub>2</sub> power cycles. As for design and optimization, conventional design methodologies for axial-flow compressors require adaptations to incorporate real-gas property correction models, re-evaluations of maximum diffusion (e.g., the DF parameter) for sCO<sub>2</sub> applications, and the intensification of structural constraints due to the high pressure and density of sCO<sub>2</sub>. In conclusion, further research should focus on two aspects. The first is to carry out more fundamental cascade experiments and numerical simulations to reveal the complex mechanisms for the near-critical, transonic, and two-phase flow within the sCO<sub>2</sub> axial-flow compressor. The second is to develop loss models and design a space suitable for sCO<sub>2</sub> multistage axial-flow compressors, thus improving the design tools for high-efficiency and wide-margin sCO<sub>2</sub> axial-flow compressors. |
|---|---|
| ISSN: | 1996-1073 |