Tribological Aspects of Rolling Bearing Failures

QR Code

Tribological Aspects of Rolling Bearing Failures

None

Saved in:

Bibliographic Details
Main Author:	Gegner, Jürgen
Format:	Electronic Book Chapter
Language:	English
Published:	IntechOpen 2011
Subjects:	Physical Sciences, Engineering and Technology
Online Access:	https://www.intechopen.com/chapters/21928
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Tribology in Water Jet Processes
by: Shimizu, Seiji
Published: (2011)

Tribological Behaviour of Solid Lubricants in Hydrogen Environment
by: Gradt, Thomas
Published: (2011)

Tribology of 2-Mercaptobenzothiazole in Lithium Complex Grease
by: Nagarkoti, B S
Published: (2011)

Tribological Properties of Fluorinated Amorphous Carbon Thin Films
by: Rubio-Roy, Miguel, et al.
Published: (2011)

Corrosion Performance and Tribological Properties of Carbonitrided 304 Stainless Steel
by: El-Rahman, A.M. Abd, et al.
Published: (2012)

Deposition and Tribology of Carbon and Boron Nitride Nanoperiod Multilayer Hard and Solid Lubricating Films
by: Miyake, Shojiro, et al.
Published: (2011)

Pid Controller with Roll Moment Rejection for Pneumatically Actuated Active Roll Control (ARC) Suspension System
by: Hudha, Khisbullah, et al.
Published: (2011)

Mechanics of Cold Rolling of Thin Strip
by: Jiang, Z. Y.
Published: (2011)

FEM Applied to Hydrodynamic Bearing Design
by: Stefani, Fabrizio
Published: (2011)

No Conventional Fluid Film Bearings with Waved Surface
by: Dimofte, Florin, et al.
Published: (2011)

Bearings Fault Detection Using Inference Tools
by: Prieto, Miguel Delgado, et al.
Published: (2011)

The Rationale for Silicon Nitride Bearings in Orthopaedic Applications
by: Bal, B. Sonny, et al.
Published: (2011)

Gearbox Simulation Models with Gear and Bearing Faults
by: Hiroaki, Endo, et al.
Published: (2012)

Mechanical Characterization of Laminated Rubber Bearings and Their Modeling Approach"
by: Bhuiyan, A. R., et al.
Published: (2012)

Numerical Modelling and Simulation of Radial-Axial Ring Rolling Process
by: Guo, Lianggang, et al.
Published: (2011)

Topographical Change of Engineering Surface due to Running-in of Rolling Contacts
by: Ismail, R., et al.
Published: (2011)

A New On-Board Energy Storage System for the Rolling Stock
by: Yano, Masao
Published: (2011)

Wavelet Analysis for the Extraction of Morphological Features for Orthopaedic Bearing Surfaces
by: Jiang, X., et al.
Published: (2011)

Adaptive Sliding Mode Control of Adhesion Force in Railway Rolling Stocks
by: Kim, Jong Shik, et al.
Published: (2011)

Development of Texture and Substructure Inhomogeneity by Recrystallization of Rolled Zr-Based Alloys
by: Perlovich, Yuriy, et al.
Published: (2012)

Comparison between Different Supply Port Configurations in Gas Journal Bearings
by: Colombo, Federico, et al.
Published: (2011)

Discussion on Robust Control Applied to Active Magnetic Bearing Rotor System
by: Jastrzebski, Rafal P., et al.
Published: (2011)

Applicability of GMDH-Based Abducitve Network for Predicting Pile Bearing Capacity
by: Lawal, Isah A., et al.
Published: (2012)

Study on Semi-Solid Magnesium Alloys Slurry Preparation and Continuous Roll-Casting Process
by: Xie, Shuisheng, et al.
Published: (2011)

Metal Stabilization Mechanisms in Recycling Metal-Bearing Waste Materials for Ceramic Products
by: Shih, Kaimin, et al.
Published: (2011)

Identification of Discharge Coefficients of Orifice-Type Restrictors for Aerostatic Bearings and Application Examples
by: Belforte, Guido, et al.
Published: (2011)

The Bearing Friction of Compound Planetary Gears in the Early Stage Design for Cost Saving and Efficiency
by: Csobán, Attila
Published: (2011)

System of System Failure: Meta Methodology to Prevent System Failures
by: Nakamura, Takafumi, et al.
Published: (2012)

Modeling, Simulation and Experimental Studies of Distortions, Residual Stresses and Hydrogen Diffusion During Laser Welding of As-Rolled Steels
by: Böhme, T., et al.
Published: (2012)

Polyimides Bearing Long-Chain Alkyl Groups and Their Application for Liquid Crystal Alignment Layer and Printed Electronics
by: Tsuda, Yusuke
Published: (2011)

Rolling bearings
by: Nisbet, Thomas Stewart, 1914-
Published: (1974)

Telemetry as a Tool to Study Spatial Behaviour and Patterns of Brown Bears as Affected by the Newly Constructed Egnatia Highway – N. Pindos - Greece
by: G., Mertzanis, et al.
Published: (2011)

Dynamical Aspects of Apoptosis
by: Bensussen, Antonio, et al.
Published: (2012)

Oil-Spill Bioremediation, Using a Commercial Biopreparation "MicroBak" and a Consortium of Plasmid-Bearing Strains "V&O" with Associated Plants
by: Filonov, Andrey, et al.
Published: (2012)

The Performance of Wireless Mesh Networks with Apparent Link Failures
by: Egeland, Geir, et al.
Published: (2011)

Material Characterization and Failure Analysis for Microelectronics Assembly Processes
by: Huang, Chien-Yi, et al.
Published: (2011)

Comparison Sequential Test for Mean Times Between Failures
by: Michlin, Yefim Haim, et al.
Published: (2011)

The Failure Mechanism of Recrystallization – Assisted Cracking of Solder Interconnections
by: Mattila, Toni T., et al.
Published: (2012)

Spectral Clustering and Its Application in Machine Failure Prognosis
by: Li, Weihua, et al.
Published: (2012)

Ionic Liquids as Advantageous Solvents for Preparation of Nanostructures
by: Nan, Alexandrina, et al.
Published: (2011)