Optimal Shell and Tube Heat Exchangers Design

QR Code

Optimal Shell and Tube Heat Exchangers Design

None

Saved in:

Bibliographic Details
Main Authors:	Ravagnani, Mauro A. S. S., Silva, Aline P., Caballero, Jose A.
Format:	Electronic Book Chapter
Language:	English
Published:	IntechOpen 2011
Subjects:	Physical Sciences, Engineering and Technology
Online Access:	https://www.intechopen.com/chapters/20003
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Fin-Tube Heat Exchanger Optimization
by: Wais, Piotr
Published: (2012)

Modelling and Optimizing Operating Conditions of Heat Exchanger with Finned Elliptical Tubes
by: Łopata, Stanisław, et al.
Published: (2012)

Direct and Inverse Heat Transfer Problems in Dynamics of Plate and Tube Heat Exchangers
by: Taler, Dawid
Published: (2011)

Numerical Simulations of Unsteady Fluid Forces in Heat Exchanger Tube Bundles
by: Omar, H., et al.
Published: (2011)

Numerical Modeling of Cross-Flow Tube Heat Exchangers with Complex Flow Arrangements
by: Taler, Dawid, et al.
Published: (2011)

Cross-Flow-Induced-Vibrations in Heat Exchanger Tube Bundles: A Review
by: Khushnood, Shahab, et al.
Published: (2012)

Modeling and Simulation of the Heat Transfer Behaviour of a Shell-and-Tube Condenser for a Moderately High-Temperature Heat Pump
by: Lee, Tzong-Shing, et al.
Published: (2011)

On the Optimal Allocation of the Heat Exchangers of Irreversible Power Cycles
by: Aragón-González, G., et al.
Published: (2011)

Numerical Analysis of Heat and Mass Transfer in a Fin-and-Tube Air Heat Exchanger under Full and Partial Dehumidification Conditions
by: Benelmir, Riad, et al.
Published: (2011)

Heat Exchangers for Thermoelectric Devices
by: Astrain, David, et al.
Published: (2012)

Helically Coiled Heat Exchangers
by: Jayakumar, J. S.
Published: (2012)

PCM-Air Heat Exchangers: Slab Geometry
by: Dolado, Pablo, et al.
Published: (2012)

Enhancement of Heat Transfer in the Bundles of Transversely-Finned Tubes
by: Pis’mennyi, E.N., et al.
Published: (2011)

Experimental Prediction of Heat Transfer Correlations in Heat Exchangers
by: Sobota, Tomasz
Published: (2011)

Heat Transfer Modeling of the Ground Heat Exchangers for the Ground-Coupled Heat Pump Systems
by: Man, Yi, et al.
Published: (2012)

Heat Conduction Problems of Thermosensitive Solids under Complex Heat Exchange
by: Kushnir, Roman M., et al.
Published: (2011)

Analytical Solution of Dynamic Response of Heat Exchanger
by: Gvozdenac, D.
Published: (2012)

Fouling and Fouling Mitigation on Heat Exchanger Surfaces
by: Kazi, S. N.
Published: (2012)

Self-Cleaning Fluidised Bed Heat Exchangers for Severely Fouling Liquids and Their Impact on Process Design
by: Klaren, Dick G., et al.
Published: (2012)

Single-Phase Heat Transfer and Fluid Flow Phenomena of Microchannel Heat Exchangers
by: Dang, Thanhtrung, et al.
Published: (2012)

Design of the Heat Conduction Structure Based on the Topology Optimization
by: Zhang, Yongcun, et al.
Published: (2011)

Numerical Analysis of the Structural Stability of Heat Exchangers – The FEM Approach
by: Chudzik, Agnieszka A.
Published: (2012)

Convective Heat Transfer of Unsteady Pulsed Flow in Sinusoidal Constricted Tube
by: Batina, J., et al.
Published: (2011)

Fouling in Plate Heat Exchangers: Some Practical Experience
by: Kananeh, Ali Bani, et al.
Published: (2012)

Heat Transfer and Hydraulic Resistance in Rough Tubes Including with Twisted Tape Inserts
by: Tarasevich, Stanislav, et al.
Published: (2011)

The Characteristics of Brazed Plate Heat Exchangers with Different Chevron Angles
by: Subbiah, M.
Published: (2012)

Study Regarding Numerical Simulation of Counter Flow Plate Heat Exchanger
by: Roxana, Grigore, et al.
Published: (2011)

Mesoscopic Non-Equilibrium Thermodynamics: Application to Radiative Heat Exchange in Nanostructures
by: Pérez-Madrid, Agustín, et al.
Published: (2011)

Ground Coupled Heat Pumps in Mixed Climate Areas: Design, Characterization and Optimization
by: Montero, Álvaro, et al.
Published: (2010)

Heat Exchange in Furnace Side Walls with Embedded Water Cooled Cooling Devices
by: Plascencia, Gabriel
Published: (2011)

Compact Heat Exchange Reformer Used for High Temperature Fuel Cell Systems
by: Zhang, Huisheng, et al.
Published: (2012)

Impact of a Medium Flow Maldistribution on a Cross-Flow Heat Exchanger Performance
by: Bury, Tomasz
Published: (2012)

Heat Transfer Performances and Exergetic Optimization for Solar Heat Receiver
by: Lu, Jian-Feng, et al.
Published: (2011)

CFD Modelling of Fluidized Bed with Immersed Tubes
by: Costa, A.M.S., et al.
Published: (2012)

A Study on Design of Fiber-Reinforced Plastic (FRP) Tubes as Energy Absorption Element in Vehicles
by: Yang, Yuqiu, et al.
Published: (2011)

Optimal Design of Cooling Towers
by: Rubio-Castro, Eusiel, et al.
Published: (2011)

The Soultz-sous-Forêts’ Enhanced Geothermal System: A Granitic Basement Used as a Heat Exchanger to Produce Electricity
by: Ledésert, Béatrice A., et al.
Published: (2012)

Optimal Design of Cooling Water Systems
by: Rubio-Castro, Eusiel, et al.
Published: (2011)

Reliability of Degraded Steam Generator Tubes
by: Cizelj, Leon, et al.
Published: (2011)

Question-Answer Shell for Personal Expert Systems
by: Sosnin, Petr
Published: (2011)