Søgeresultater - J. T. Lin
-
1
Conductivity of microfibrillar polymer-polymer composites with CNT-loaded microfibrils or compatibilizer: A comparative study
Udgivet 2013-07-01Få fuldtekstConductive polymer composites have wide ranging applications, but when they are produced by conventional melt blending, high conductive filler loadings are normally required, hindering their processability and reducing mechanical properties. In this study, two types of polymer-polymer composites wer...
Article -
2
Development of 6-inch h-BN thick wafers
Udgivet 2025-06-01Få fuldtekstWe report the first successful synthesis of 40 μm thick h-BN wafers with a diameter of 6 in. using hydride vapor phase epitaxy. This accomplishment was made possible by employing BCl3 as the B precursor to eliminate carbon impurities, utilizing inert N2 as the carrier and separation gas to isolate B...
Article -
3
Preliminary performance analysis using the PPP-RTK service of the National Land and Mapping Center in Taiwan
Udgivet 2025-07-01Få fuldtekstLow-cost navigation and positioning systems have become a prominent research field in recent years. In the autonomous vehicle domain, real-time accurate vehicle position determination within lanes is essential for high-level autonomous driving. Regarding real-time performance, while (Precise Point P...
Article -
4
<inline-formula> <tex-math notation="LaTeX">$\text{Er}^{3+}$</tex-math></inline-formula>- Doped Nanoengineered Yttria-Stabilized Zirconia Alumino-Silicate Fiber for Efficient CW an...
Udgivet 2016-01-01Få fuldtekstWe report on the development of efficient continuous wave (CW) and mode-locked ring fiber lasers utilizing an <inline-formula> <tex-math notation="LaTeX">$\text{Er}^{3+}$</tex-math></inline-formula>- doped nanoengineered yttria-stabilized zirconia alumino (YSZA)-sil...
Article